Sidewalk Chalk Stick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this chalk holder/stick for laying out pickleball court lines. You can adjust the angle of the chalk so you…
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 93
- Makes
- 2
- Views
- 973
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
I designed this chalk holder/stick for laying out pickleball court lines. You can adjust the angle of the chalk so you can push it while walking forwards, or pull it while walking backwards. It attaches to the end of a 3/4" (19mm) dowel or rod. You'll also need a 1/4-20 x 1.25" long bolt, a 1/4-20 nut, and a small wood screw to secure the dowel.
All parts print in the orientation supplied and without supports. With the Collet part, you might want to add a brim to help secure the clamping fingers while printing. Print with at least 4 perimeter lines and 35% infill for strength.
Print Settings
Printer:
UDIO
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
35%
Filament:
Inland PLA
Category: Art Tools