STALKER 2 - Weird Ball Artifact
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on the Weird Ball artifact from the S.T.A.L.K.E.R. 2: Heart of Chornobyl game.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 1
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
Easy print using three colors (blue, yellow and red). The parts can be assembled using 5x5 mm round magnets or glue/double sided tape.
These are the magnets I used: https://enesmagnets.pl/en/permanent-magnets/neodymium-sintered/cylindrical-magnets/d5-x-5-n38-cylindrical-neodymium-magnet.html
I can recommend the PrimaSelect Matte PLA filaments (Deep Ocean Blue, Mustard Yellow and Rose Red): https://www.3dprima.com/se/primaselect-pla-matt_30284_13161
The project file is prepped with supports, but it can probably be printed without support. Only the inside that will suffer.