1 / 2
14mm Shaft Clamp - Milescraft Drillmate Depth Stop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
14mm shaft clamp that I use on my Milescraft Drillmate as a depth stop
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I was looking for an easy way to set the depth on a Milescraft Drillmate; the tool that lets you turn your drill into a drill press. The clamp takes a 5mm heat set insert and a knob for a 5mm hex-headed bolt. First set the shaft clamp that comes with the Drillmate to the depth where the drill bit just starts drilling, then use a setup block to set the second shaft clamp under the existing clamp. After removing the setup block, move the first clamp down to the second clamp and your depth is set.