1 / 5
2020 extrusion stationary holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Put some note taking stuff on 2020 extrusion.Space for 5 pens and 2 small note pads.Width: 60 mmPen holes: 5 x 15mm…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Put some note taking stuff on 2020 extrusion. Space for 5 pens and 2 small note pads.
Width: 60 mm Pen holes: 5 x 15mm hexagonal Max notepad thickness: 15 mm Hole spacing: 45 mm + center hole if you need to put it on a vertical extrusion Hardware needed:
- 2 x countersunk M3 x 10
- 2 x M3 hammer nut Notes:
- Screws need to be hex or possibly torx to fit in the pretty small holes (3mm) on the front and the tool need at least 43 mm free shaft to reach.
- Cut off the round feet on the left side, they are there so it sticks better to the print bed.
Category: Organization