1 / 1
Connector for 2x2 Dimensional Lumber
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Piece to connect 2 pieces off standard 2x2 furring strips together.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
These were some basic models that I designed to help connect 2x2 furring strips for the enclourse around my MPCNC (V1 Engineering).
One model will serve can be screwed down onto a base and the other will serve as a connection piece. Both models have a hole on the corner where a bolt can be used the secure the wood. I used 10-32 bolt but M4 bolt would probably work too.
Printed with PLA at 15% infill. The Connector needs supports but the Base can be printed without them.