Snowglobe Christmas tree ring
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.24 net (excluding VAT)
For file: treering_02mm_pla_mk3s_15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.22 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 15 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Personally I love this ring, but I did it more as a "will this work" than a practical print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Personally I love this ring, but I did it more as a "will this work" than a practical print. It does work but you need to be on top of it.
It makes a fun gift with the moving "snow". Needs a 16mm pad ring blank and resin to finish.
Pictures show the ring finished with a UV resin bubble and straight off the printer with and without sand.
Print instructions
Everything is printed in PLA at .20mm
Filament changes at layer 2 and layer 16 (in the .gcode)
The key to making this work is getting down 1 solid layer of clear PLA for the top.
At layer 2 switch to green PLA.
If using sand to fill stop the fan at 8 minutes remaining.
Change filament to blue (or any other color) at layer 16 add sand (or other filler) at this time.
Restart the fan after the sand is covered.
Finish with a bubble of UV resin over the top (makes the top even more clear). I also use the resin to attach the print to a ring vase with a 16mm pad.