1 / 2
HULA Adapter (Neptune 4 series)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
provides low profile HULA Adapter for stock Hula
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 74
- Makes
- 1
- Views
- 640
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Hula adapter is build for Hula Voron Feet, meaning the most basic Hula Feet you can get.
Get your Hula printable files here: https://github.com/thrutheframe/HULA_Voron
You are required to print the “HULA TPU parts STL” and “HULA rigid parts STL”
The intention was to get away with the minimal possible footprint overhead possible, side to side but also in height.
Print/Assembly
- requires 4x Hula Voron Feet (see link above)
- requires 2 Front and 2 rear feet or
- 4 rearfeet all around
- Print TPU named Part in TPU
- Petal Part is optional - geometry is optimised for slicing with less retracts
- reuses stock N4 feet bolts
- in the back use the outer holes to provide clearance for the PSU
- bolt the non tpu parts to the printer, then slip the tpu parts over it
- tpu sleeve is further reducing chances of audible vibrations