The Owl House Grom Tree
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: grom tree-leaves_0.15mm_PLA_MK3S_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model of the Grom Tree from The Owl House
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution
This is a model of the Grom Tree as seen in The Owl House.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| 90mm | 105mm | 136mm |
Print Instructions
Everything was printed at 0.15mm layer height.
Tree
The tree needs organic supports.
Be very carefull when removing the supports. The smaller branches snap off easily.
Leaves
The leaves are printed without supports.
They are supposed to be hollow, with 1 layer thick walls and base and a small hole at the bottom.
Printing “grom tree-leaves” should do just that. If it doesn't work with your silcer, try using “grom tree-leaves filled” instead. With this file, you will have to adjusting infill and shell thickness and add the hole yourself.
Print as many as you want. You can also vary the scale a bit, but be aware that at larger scales, the hole will be to big for the branches, making them wobbly and easy to fall off.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#