Reliq Sequencer sloped stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sloped stand for a Reliq hybrid control surface.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
Raise your Reliq up on a angle for ease of use.
You will need to print two copies of the lower and upper angles.
You will need at least two of the connectors. I found it stable enough for me with just two.
Assemble the slopes first. Insert all the connectors into one slope assembly first and then attach the other assembly. On my print all the connections were quite snug but feel like they are solidly in place once inserted.
There are two model files, one at 4% fill (which is the fill percentage in the photo) and one at 8% fill. I found the 4% fill to be slightly squishy, but it hasn't yet bothered me in use. Using the 8% model, or turning the “Sparse infill density” up with make the print stiffer if you don't line the squishiness.