DIN rail case for EmonTX v3 with EmonESP and OLED display (SH1106).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is DIN rail case for EmonTX v3 with EmonESP and OLED display (SH1106). Custom EmonESP board Eagle/Gerber files…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 71
- Makes
- 0
- Views
- 1,063
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is DIN rail case for EmonTX v3 with EmonESP and OLED display (SH1106).
Custom EmonESP board Eagle/Gerber files are at https://github.com/stanoba/EmonESP-module
My EmonESP fork with OLED display implementation is here https://github.com/stanoba/EmonESP-OLED
BoM:
4x screws 2.9 x 5 mm
4x M3 x 8 mm screw
4x M3 nut
1x bottom part (EmonTx_V3_DIN_rail_bottom.stl)
1x top part (EmonTx_V3_DIN_rail_top.stl)
1x display part (EmonTx_V3_DIN_raildisplay*.stl) - select model that suits your needs
2x DIN rail clips (EmonTx_V3_DIN_rail_clip_35mm.stl)
2x display screw plastic washers (EmonTx_V3_DIN_rail_display_washer.stl)
1x OLED display 1.3" 128x64 SH1106
1x red LED diode
1x green LED diode
2x 2K2 resistor
1x Omron micro-switch (6x6mm)
1x Custom PCB https://github.com/stanoba/EmonESP-module
1x Wemos D1 mini PRO
1x external antenna for Wemos - optional
1x coaxial cable for antenna with IPEX connector
4x wires (different colors)
Wemod D1 mini PRO wiring:
D1 -> SCL D2 -> SDA D4 -> red LED (white wire) RST -> micro-switch (brown wire) 3V3 -> 3V3 (red wire) GND -> GND (black wire) Print Settings ==============
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament: Fillamentum PLA Electric Gray
Category: DIY