Bearing support Braket for X-Motor-Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
to support the X-Motorshaft for ! Prusa MK3/s X-Axis R4+ with full tensioner !
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
X-Motormount_Bearing_support_Braket for
Prusa MK3/s X-Axis R4+ with full tensioner by Devilscave
with this Part its posible to tension the X-Belt more , without bending the X-Motor Shaft and get less Ringing on Y .
this Part fit only on
Prusa MK3/s X-Axis R4+ with full tensioner by Devilscave
https://www.prusaprinters.org/prints/20229-prusa-mk3s-x-axis-r4-with-full-tensioner
parts need :
1pcs Bearing 625zz (16x5x5)
3x M3x25
Recommended material: PETG or ABS/ASA.
Print with 3 perimeters and at least 30% infill.
for clean screwholes switch "support on Buildplate” on..
Print orientation :
Flat on the Bearing side