1 / 6
Draining kitchen sticky sponge holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
shelf for sponge/soap that drains into the kitchen's sink using 3° slope. optimized for 3D printing
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used:
- PETG transparent filament
- 1 perimeter and 0.4mm layer height (0.8 nozzle)
- zero top and bottom layers
- global zero infill
- a box modifier (15mm height) with 10% aligned rectiliniar infill (it is important that the infill is paralel to the sides, so the water will flow along the infill)
- using a 0.8mm nozzle, line width can be 2mm (increase cooling to 100% and nozzle temp to 265)