Alita

This is the most challenging project that I have done so far.  Glad for myself finally got it printed out though it's not that perfect. The picture style is totally different from what I did before, and when I decided to work on it, I knew it might not fit for a Hueforge. However, I still want to test my skills as well as the Hueforge limit. So it turned out i had to redraw many lines and colors. For a few details, I have to compromise and balance btw keeping the original design and cleaning out some regions. Anyway, it's a good practice, hope its not looking bad to you.

Project: Alita_01.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.05x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #061919 PLA Kingroon Black  Transmission Distance: 0.2
    #6a89a7 PLA 3DHoJor Blue Grey  Transmission Distance: 3.2
    #7900b6 PLA ELEGOO Purple  Transmission Distance: 3.2
    #ffffff PLA Sunlu White  Transmission Distance: 6.2
    #ffff00 PLA Sunlu Yellow  Transmission Distance: 6
    #cd382e PLA Kingroon Red  Transmission Distance: 4.2
    #2bffff PLA Sunlu Mint Blue  Transmission Distance: 4.6
This print uses 7 unique filaments

Swap Instructions for one AMS:
Slot1: Black
Slot2: Blue grey
Slot3: Purple
Slot4: White
    Start with Black (Slot1)
    At layer #6 (0.56mm) swap to Blue Grey (Slot2)
    At layer #10 (0.88mm) swap to Purple (Slot3)
    At layer #12 (1.04mm) swap to White (Slot4)
Pause at layer 13 to allow color swaps:
Slot1: Black --> Yellow
Slot2: Blue grey --> Red
Slot3: Purple --> Mint Blue
    At layer #14 (1.2mm) swap to Yellow (Slot1)
    At layer #15 (1.28mm) swap to Red (Slot2)
    At layer #17 (1.44mm) swap to White (Slot4)
    At layer #22 (1.84mm) swap to Mint Blue (Slot3)
    At layer #24 (2mm) swap to White (Slot4) for the rest.