Otto DIY Emotional LED eyes robot
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.68 – €2.05 net (excluding VAT)
For file: OttoDIYEyes_0.28mm_PLA_MINI_1h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.87 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.69 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The most emotional robot ever. you will be able to program your STEM robot to express multiple feelings.
- Rating
- 5 / 5
- Likes
- 78
- Downloads
- 2,428
- Makes
- 1
- Views
- 9,680
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
The most emotional robot ever of the Otto family is back!. Thanks to our own developed LED “Eyes” combined with all te dance moves, touch sensor and sound gestures of all the other Ottos. you will be able to program your STEM robot to express multiple feelings, depending of the personality you want to give him/her.
Print instructions
Recommended to use a FDM 3D printer.
No need supports or rafts.
Resolution: 0.3mm or 0.2mm for better resolution
Fill density 15%
Features
- 👩💻 Simple Programming with Otto Blockly or Arduino
- 👇 Reacts to touch
- 👀 LED Matrix emotional eyes
- 📃 Instruction manual included
- 🔌 Integrated USB charger
- 👣 Walks & dances
- 🔊 Makes emotional sounds and melodies
List of Parts
- 🖥 Otto Nano Microcontroller I/O board
- 🔌 Micro USB cable
- 🔋 Rechargeable battery.
- ⚙ 4 x micro servo motors with set of screws.
- 👀 Matrix LEDs 16×8
- 👇 Touch sensor
- 🔊 Buzzer
- 🌈 10 x DuPont cables
- Phillips screwdriver
- 3D Printed head for LED matrix
- 3D print the biped body parts : Otto DIY biped| STL files |
Instruction Manual in the files tab.
You could also remote control via our Bluetooth App.
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers.
Join today our Otto Builder community