New ventilation system for RatRig V-Minion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design born to eliminate the noisy fan of the PSU, adding an extra 40mm
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 1
- Views
- 774
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General informations:
This design born to eliminate the noisy fan of the PSU.
You can keep the original 4010 fan in "pushing" (air direction: from outside to inside) and add an extra 4010 or 4020 fan in “pulling” (air direction: from inside to outside).
This will generate a recirculation of air which will cool all components (Rpi, Board, PSU and stepdown lm2596 if you want install NOCTUA fan, I did it this way)
For better PSU cooling I recommend eliminating the original cover and print this:
“Voxelab Aquila PSU Cover / Meanwell LRS-350-24” by sakrebel (this is a remix of qrrak and ddonnie)
This is the link of stepdown case:
Thanks TC for this design, work perfectly without modification.
To fix the two case, I used the two existing holes on the bottom panel.
https://www.prusaprinters.org/it/prints/120165-lm2596-enclosure/files
Printing instructions:
3 or 4 perimeters, 20% infill
No support, print it face down