rae-dux keyboard case with tripod (1/4-20) adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case that fits the rae-dux split ergonomic keyboard, and adds attachability to any tripod/superclamp/tenting setup.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This case fits my rae-dux PCB, and comes with a sliding rail at the bottom that you can attach to the included tripod mount (modeled for drop-in nuts, 10.8mm x 5.3mm, put a pause in the print process!) simply by sliding each half in.f
The parts, as printed by my A1 mini, fit together without glue or filing, and stay wedged in place pretty well, even printed in PLA (I did use matte PLA). When printing the tripod pucks, make sure there's a pause at the start of the layer that covers the hole included for the nut, and then drop the nut in place. Then continue the print and watch the nut get buried by the plastic covering it.