1 / 1
Expo Marker Holder for HSW
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just the same container but modified to use M3 hardware to be mounted on the Honeycomb Wall Storage system
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Requirements
3D prints:
- This model
- (2) insert-with-m3.stl [A], found here (https://www.printables.com/model/152592-honeycomb-storage-wall/files#preview.file.6XFkH) under Fasteners and parts for attaching hooks and objects category
M3 hardware:
- (2) M3x8mm socket head screws
- (2) M3 nuts
Tool
2.5mm hex key
Installation:
- Insert M3 screws from the front using the front visible holes of the model
- Mount M3 nut into the back of [A]
- Screw M3 screw into [A], partially tighten, with a hex key
- Align both inserts with HSW, then fully tighten
- Push the model into the HSW until it snaps into place