1 / 3
Case for Raspberry Pi 4 Model B with Waveshare UPS hat
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extra heigh case so a Waveshare UPS hat can be mounted on top of the Raspberry Pi 4 Model B.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 287
- Makes
- 0
- Views
- 1,413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a case for a Raspberry Pi 4 model B with a Waveshare UPS hat mounted on top. The Raspberry Pi can be mounted to the base plate using the M2.5 standoffs between the Raspberry Pi and the Waveshare UPS hat. The hat can then be fixed using a M2.5 28mm standoff. The lid can then be mounted using tapered or flat M2.5 screws.
The USB and Ethernet connector of the Raspberry Pi 4 are flush with the edge of the lid, which is not the case with a lot of other cases. All the connectors on the side are also still accesible.