mushroom nightlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
cosy mushroom nightlight
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 19
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
cosy mushroom nightlight for décor and light.
piece 1:
- PLA or PETG
- no supports
- 0.15 layers
- adhesion
piece 2:
- PLA or PETG
- no support/support
- 0.15 layers
- adhesion
other:
- cable: USB 3.0 Male to Male Cable 3Ft,USB to USB Cable with Gold-Plated Connector for Hard Drive Enclosures, DVD Player, Laptop Cooler on amazon
- led: YIPINER 20 Pieces Mini USB Night Light, USB LED Light, Energy Saving Light 2 Colors… on amazon
assembly:
Cut off one of the ends of the cable, then peal off 2-3cm of the outer layer with a scissor and cut off all smaller cables except the red and black. Now gently peal off 1cm of the red and black cables until you reach the metal inside. Pass the cable through the hole on the side of the stem. Grab a LED and pull off the white piece, then pull out the inner LED (make shore it has 2 metal sticks coming out of it's bottom). solder or glue the metal coming from the red cable to the positive side of the LED and the black to the negative; now pull the cable until the LED is on the bottom of the cup. Finally glue on the top piece