Prusa i3 MK2 and MK3 Series Bed Level Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Having weird issues with your bed leveling not quite working out very well? Use this to test it! This prints a 25x25mm…
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 273
- Makes
- 2
- Views
- 752
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Having weird issues with your bed leveling not quite working out very well? Use this to test it!
This prints a 25x25mm square in the center of each grid square on your Prusa i3 MK2 or MK3 series printer, so you can see where exactly where the bed leveling is failing. This helped me a lot when diagnosing an issue where one side of the bed was much closer to the nozzle than the other; I hope it can help you fix the issues with your bed as well!
This print is designed to be printed at a resolution of 200 microns - just a single layer printed, so you can see where exactly you need to adjust.
EDIT: I've noticed a lot of you are using this to see if your bed is working correctly, especially the MK3. If you could, I would greatly appreciate if you would post your results in the comments, and take pictures and post it as "I Made This Thing". It seems like there's something funky going on recently affecting the MK2 and the MK3 regarding bed leveling.
Category: 3D Printing Tests