Model M USB controller/converter mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully reversible mod, no cutting, filing, etc required. Fits the IBM Model M 1392595 terminal keyboard and many other…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Fully reversible mod, no cutting, filing, etc required. Fits the IBM Model M 1392595 terminal keyboard and many other variants while still utilizing the stock controller board (converting protocol using Soarer's converter firmware or similar). Should fit any non-Unicomp Model M if you remove the controller board and connect directly to the matrix with some FPC connectors and run Soarer's controller firmware or similar.
This mount will fit the Teensy 2.0/2.0++/3.0/etc, Arduino Pro Micro, and pretty much any ~20mm wide mini/micro USB project board. The Teensy/Arduino is simply slid into the mount and held in place with a bit of glue. The mount goes where the cable/socket originally was and is held in place with the stock mounts.
Category: Replacement Parts