1 / 3
Raspberry Pi 3B/4B/5 10-inch Rack Mount with JetKVM 1 Keystone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combine two models from @Mauker 's 10 inch rack for my own use case: one Raspberry Pi 3B + one JetKVM + one jack
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 175
- Makes
- 1
- Views
- 1,872
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 10-inch rack mount for one Raspberry Pi and one JetKVM devices. Compatible with RPi 3B, 4B and 5B.
This Model is a Remix of @Mauker's 10 inch rack series. You can check out the others here.
Required parts
RaspberryPi
- 4x M2.5 thread inserts.
- 4x M2.5 screws.
JetKVM
- 2x M2x12mm screws.
Assembly instructions
RaspberryPi
- Insert the 4x M2.5 thread inserts into the mount.
- Insert your Raspberry Pi into the mount.
- Secure it with 4x M2.5 screws.
JetKVM
- Remove the two M2 screws from the top of your JetKVM.
- Insert the JetKVM into the mount, and align the screw holes from the mount with the screw holes from the KVM.
- Insert the 2x M2x12 screws and tighten them.
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
3.
Infill:
20% or more.
Filament:
PETG, ASA (you need some heat resistence).