Mirka Deros C35 (Click and Clean) Hose connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This connector has the benefit of being short enough to keep on using the systainer
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 1
- Views
- 333
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It might only work with the 35mm hose that is part of the GAS35 kit (Bosch PN: 2608000566), as the inside geometry is kind of important with this design. The inside diameter of the BOSCH C35 connector should be something like 32mm, as this connector requires at least 31,4mm at the inside of the hose, for a depth of 11mm:



The connector gets mounted by twisting the connector of the Mirka Deros counterclockwise. I also added some adhesive foam between the power connector and this connector, to be sure, that it doesn't rattle. It's not that necessary.


As mentioned it still fits in the original systainer from mirka:

I used Polymaker PETG ESD, as I wanted to keep the antistatic function of the hose. It prints without supports. I added a brim for good adhesion.
Printing orientation:
