1 / 9
Watering can birdhouse
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A birdhouse based on an old pewter watering can
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A birdhouse based on an old tin watering can
Internal dimensions are 15cm diameter and 10cm deep
The hole is 32mm
The lid has a screw thread to fasten and if necessary to unscrew the inside to clean it.
The spout, stick and hand tight must be glued to the base.
I printed it with ABS filament, 0.20 mm layer thickness and 15% filling.
No support needed.