Cable clamp THE ULTIMATE BEST- 2 sizes, strong, ratcheting, print-in-place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 strengthened versions of Markytemp's Clamp: 1 sm enough for phone charging cables, 1 lrg enough for 100ft ext cords.
- Rating
- 4.5 / 5
- Likes
- 21
- Downloads
- 145
- Makes
- 1
- Views
- 445
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
The sizes of the small and large clamps overlap, and they are superior to my store bought “CableCuff Pro” clamps (in terms of size range and strength). The small size works for anything from USB-C style cords to smaller extension cords. The larger size works for 100 foot extension cords or a few loops of a garden hose.
The small clamp is strong enough to static hold 25 lbs, the large one more than 45 lbs. To be printed in place.
PRINTING INSTRUCTIONS:
- DO support on the toothed end part that does not touch the build plate.
- You COULD support the bridged area of the clasp, but you don't need to as there is tolerance.
- do NOT support the print-in-place hinge, as this will cause it to fuse together.
I printed out of PETG in .2 layer height, with 100% infill (technically, it was all perimeters). PLA+, ABS/ASA, or other filaments would work as well.