1 / 6
Halter für Wellpappedächer / mount for corrugated roofs — image 1
1 / 6

Halter für Wellpappedächer / mount for corrugated roofs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Leicht zu druckender Halter für Wellpappedächer. Easy-to-print bracket for corrugated cardboard roofs.

Rating
0 / 5
Likes
4
Downloads
18
Makes
0
Views
107
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Für den Gartenpool meines Sohnes sollen ein paar Solarthermiemodule angeschlossen werden, um das Wasser etwas zu erwärmen. Der sonnigste Platz ist das Dach auf der Garage, wo die 4m langen Module auch nicht stören. Das Dach ist mit Wellpappe eingedeckt. Schwierig dort etwas zu befestigen. Daher habe ich Halter entworfen, die in die vorhandenen Schrauben eingehakt werden. Auf die Halter lassen sich nun Schienen montieren. Diese können in den seitlichen Bohrungen eingehakt werden. Die Abdeckkappe, ggfs. ein bisschen skalieren, falls sie sich zu schwer/leicht eindrücken lässt.

Druckeinstellungen:
Material: PETG
Düse: 0.4mm
Layerheight: 0.2mm
Infill: 45% Gyroid
Support: keiner 

Da die Wellpappe aufgrund des Alters unterschiedlich verformt hat, habe ich die Modelldateien in 3 Höhen bereitgestellt (35mm, 37mm und 39mm Höhe)

Auf Wunsch kann ich auch andere Höhen einstellen.
Freue mich über Feedback und eure Makes.

A few solar thermal panels are to be connected to my son's garden pool to heat the water a little. The sunniest place is the roof on the garage, where the 4 metre long modules don't get in the way. The roof is covered with corrugated cardboard. Difficult to attach anything there. That's why I designed brackets that are hooked into the existing screws. Rails can now be mounted on the brackets. These can be hooked into the holes on the side.
If necessary, scale the cover cap a little if it is too difficult/easy to press in.

Pressure settings:
Material: PETG
Nozzle: 0.4mm
Layerheight: 0.2mm
Infill: 45% Gyroid
Support: none

Since the corrugated cardboard has deformed differently due to age, I have provided the model files in 3 heights (35mm, 37mm and 39mm height)

If you need, I can also provide other heights on request.
I am looking forward to your feedback and your makes.