1 / 2
Ozito BSR-7000 Vacuum Adaptor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small coupler to connect a standard size vacuum to an Ozito BSR-7000
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small adaptor for an Ozito 800W Belt Sander (BSR-7000) to adapt to a circular vacuum cleaner inlet for dust extraction. The vacuum cleaner outlet side is large enough to accommodate a ~34.5mm vacuum (e.g. Ryobi shop vac) but you could use a smaller vacuum adaptor with a bit of tape around the nozzle.
Print with the circular vacuum side facing down. This design is intended for PETG due to the flexibility of the filament - any alternative filament would need to be similarly flexible (i.e. not PLA).