1 / 13
SIGMA Cuberider II rear light bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for the SIGMA Cuberider II rear light for mounting on the ROSE - Seat Post Carrier SPR III.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SIGMA Cuberider II Lamp Bracket for ROSE - Sattelstützträger SPR III
A bracket for the SIGMA Cuberider II rear light for mounting on the ROSE - Seat Post Carrier SPR III.
Fittings
- 4x Round-head screw M5 x 12 mm
- 4x Screws nut M5
- 8x Washers M5
Temperatures, Speed and Materials
- Filament: PETG
- Printing speed: 100.0 mm/s
- Layer: 0.2mm
- Perimeter: 3
- Infill: 80%
- Infill pattern: Adaptive Cubic
- Print temperature: 235 °C
- Temperature hotbed: 75 °C
- Supports: Yes
- Brim: Yes
### Approximate Printing Times and Filament Quantities
- Lamp bracket: Time ~1:23 h, ~Quantity: ~21.66 gr, ~7.20 m
- Lamp holder test part: Time ~0:04 h, ~Quantity: ~0.88 gr, ~0.29 m