Leverless Wristrest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wristrest for acrylic leverless controllers that measure 128x210mm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This wristrest fit my SKY 2040-M16 leverless controller that measures 128x210mm. If you want to check if it will fit yours without wasting all the filament, you can use the hole check model first and see if the holes line up. In my case, I was able to replace the original screws with M3x10 screws and a washer for a secure fit. Depending on the fasteners that came with your leverless, you may need different screws.
There is no cut out for the USB pass through.
My example print was with PLA, sliced in Orca with adaptive layer height, and 3d honeycomb infill.