1 / 8
Honda Odyssey 2011-2020 Sliding Door Cable Motor Piece — image 1
1 / 8

Honda Odyssey 2011-2020 Sliding Door Cable Motor Piece

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement for the plastic component found within the sliding door cable motor mechanism of the Honda Odyssey 2011-2020

Rating
0 / 5
Likes
1
Downloads
33
Makes
0
Views
337
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution

Recently, the sliding door mechanism of my friend's Honda broke down. After some investigation, they discovered that a vital plastic part within the motor mechanism had broke. So they asked me to print them a new one. Their only other option would have been to purchase the entire motor assembly which could have costed them almost 1000$.

After some back and forth, we managed to replicate the broken piece for assembly and it has been working great!

Through some online searching, we discovered that this piece breaking was a common issue, so they recommended I share the model for anyone else that's having this issue, and so I hope that I can help someone else that also sadly comes across this problem.

When I printed the final version of the model, I printed it in PETG for the extra strength. I would recommend printing it on slower speeds.

Recommended Print settings:
- 0.16mm layer height 
- 4 walls
- 100% infill

- I highly recommend it be printed with the C-clip side facing down.
- Make sure to check that the orientation of the main part is not flipped, and if it is, make sure to properly flip it within your slicing software.
- The metal pieces and plastic wheel were all taken from the original broken part and put into the new part.
- There are plenty of YouTube videos that can instruct you on how to disassemble and reassemble the motor mechanism.

I hope this helps for anyone else with this issue
If it did, or if you have any questions, please leave a comment