1 / 6
TECAN Freedom EVO 4x1 Trough carrier
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trough carrier for 25ml or 100ml on the TECAN Freedom EVO decks
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Trough carrier for 25ml or 100ml troughs on the TECAN Freedom EVO decks.
Instructions
- Print the front part (carrier-12) with default settings.
- Print the rear part (carrier-3) with supports. I used Lattice-like supports. Easy to break away later.
- Get an M5 nut, ideally securing. Place it inside the front part's hexagonal cut-out.
- Get an M5 screw depending on how many racks you join together. Each rack has a width of 24mm. The screw should be in total 3-5mm shorter. E.g. for a single rack, a 20mm screw should be perfect. For a double rack rather 45mm.
- Screw it in
- Place on the deck