RaspberryPi screen holder for Jubilee
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom screen holder for Raspberry Pi 7" touchscreen, designed to fit directly onto the Jubilee motion platform.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Bill of Materials
To assemble the raspberry Pi screen holder, you will need the following components:
1 × screen_lid (3D printed – STL file included)
1 × screen_holder (3D printed – STL file included)
4 x M5 hex screws – 8 mm length
4 x Drop-in T-nut, M5 thread – for 20 mm aluminum profile
8 x M2.5 hex screws – 6 mm length
4 x M2.5 heat-set inserts – for plastic
Note: The screen mounts directly to the printed part – please remove the original metal standoffs from the Raspberry Pi display before installation.
License and Sources
This project is released under the GNU General Public License v3.0 (GPLv3).
You are free to share, adapt, and build upon this work, even for commercial purposes, as long as you credit the original author and license your new creations under the same terms.
© 2025 Sony Computer Science Laboratories
Author(s): Damien Corset
You can redistribute and/or modify this project under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This project is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see:
http://www.gnu.org/licenses/
This work was supported by the European Innovation Council Pathfinder Open DREAM (grant no. 101046451).