Sovol SH02 Silica Gel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The filament dryer is really great. Unfortunately, the silica gel inside the container is quite limited.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 129
- Makes
- 1
- Views
- 1,079
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
The filament dryer is really great. Unfortunately, the silica gel inside the container is quite limited, so I designed an additional vertical unit for extra capacity. Please make sure to use a suitable material that won’t melt when the dryer is operating — for example, PETG is recommended.
To print this model correctly, please follow these instructions:
At the very top layer, insert a pause in your slicer. This pause ensures that the model is not fully closed yet. During this pause, fill the container with silica gel beads. After filling, resume the print so that the remaining layers completely enclose the silica gel inside the container.
Important:
When using the printed container, always make sure it’s printed from heat-resistant filament like PETG, or remove it from the dryer during high-temperature drying cycles to prevent the housing from deforming or melting.