1 / 4
IKEA TISKEN Hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.13 – €0.16 net (excluding VAT)
For file: IKEA_TISKEN_Hook_0.4n_0.2mm_PETG_MINIIS_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 8.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple little hook to hang up swimwear, soap, or similar things.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 65
- Makes
- 1
- Views
- 186
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
IKEA TISKEN Hook
A simple little hook to hang up swimwear, soap, or similar things.
Installation
- Take the basket off the suction hooks
- Put the printed hook into the gap, and slide it forward.
- Reattach the basket the the suction hooks
Settings
- 2 perimeter
- 0,2 layer hight
- 15 % infill