1 / 8
Jeep Wrangler TJ (97-02) Front Upper Speaker Pods - 6.5" — image 1
1 / 8

Jeep Wrangler TJ (97-02) Front Upper Speaker Pods - 6.5"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Speakers that go against the windshield up and out of the way.

Rating
0 / 5
Likes
19
Downloads
120
Makes
0
Views
982
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

I bought some nice speakers for my wife's 2002 Jeep and after stuffing them in the dashboard with a variant of the brackets around I decided that it didn't sound as good as it could.  I couldn't find anything like this (maybe that is for a good reason) but I was trying to go for a more OEM look and less of the come-and-steal-my-aftermarket-system look that a lot of the aftermarket stuff seems to look like.  So knowing little about audio and even less about CAD I embarked on several iterations of parts of this to get it to look decent, mount a 6.5" speaker, still be able to use the hardtop with doors and tuck up front where it could be more heard and less seen. While I haven't tested the hardtop on the current jeep, I tucked it up in another jeep with the hardtop and it not only fits but the bolts are accessible so it can be slid back if needed very easily to install or remove the hardtop.  This will not work with the soft top upper door frames as it blocks the hole.  The soft top or bikini top will be fine just not the door frames. This may work with jeeps that have the plastic trim around the windshield but mine doesn't so I designed it around mine. 

I designed this to fit the speakers and speaker grill I purchased but I imagine they will fit other 6.5" speakers of similar depth.  I would recommend some poly stuffing in any small pods like this to get the best performance.  I also used some deutsch connectors to make these a bit easier for wire.

I printed the shell parts with an ASA filament (I really like the Flashforge Brand ASA) with the generic Bambu strength profile on my P1S.  I printed the top shell on the top face since it will be facing the sky. I also used a modifier around the windshield offset part to increase the infill. Don't forget to mirror the upper to get the driver side pod. The bottom faces should be printed on the fully flat surface.  Then I glued them together before doing anything else.  The screws I used are 4mm through the speaker grill, speaker and bottom face.  There are 3 TPU parts also to seal it up a bit and as a bushing for the front windshield (similar to how the stock ones mount on the rear roll bar).  You will need some length of ¼"x20 threaded rod or bolt with the head cut off as the stud for the windshield part.  You will have to poke a hole through the wire grommet and push your speaker wire through.

You will have to drill 3 holes per side, one in the windshield frame (7/16" is what the bushing fits) and two in the door roll bar (sized for whatever screws you will be using).  If you are a veteran Jeeper that shouldn't scare you that bad as we have probably already cut the fenders and bumpers off but if you are new to Jeeps, my favorite thing about them is making them what I want and sometimes that means cutting, grinding, drilling or welding to get what I want.  Don't be afraid of a few holes.  Just make sure to paint the bare metal.

Currently (6/17/25) I have the first prototype installed and I have no longevity information on it.  I will follow up at intervals with updates.  If it holds up pretty well I will be bed lining them and if they don't hold up then I will be fiberglassing them for additional strength.  

7/19/25 - No signs of delamination or cracks that I can identify.  While no rock crawling has happened the South Texas sun and beach are are hard on materials but I don't see any issues yet with these pods.

9/20/25 - Still no signs of delams or cracking.  

4/20/26 - Rock crawling, mud holes, beach days and blasting these speakers and still no visible issues.  I am overall quite happy with these.

Tags