1982 Yamaha XJ650 Seca Intake Boot Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers for XJ650 Seca intake boots to be used when carbs are removed.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
If you're like me and were almost done with your carb clean/rebuild for... a while, you might also be like me and want a plug to keep critters from crawling into your engine via the intake boots. I swapped out the shop rags stuffed in the intake boots with these 3D printed caps.
I printed them with a .4mm nozzle, .2mm layer height (default settings across the board) and they had a nice snap fit into the intake boots. There are also some little tabs to help remove them if you ever feel the need to reinstall your carbs and ride your motorcycle.