Flashforge Adventurer 5m / 5m Pro PROPER XY Belt tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So, i was tired of the stupid springs tensioner that was too tiresome to use. And designed my own proper tensioner.
- Rating
- 5 / 5
- Likes
- 122
- Downloads
- 392
- Makes
- 3
- Views
- 3,980
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So, i was tired of the stupid springs tensioner that was too tiresome to use. And designed my own proper tensioner that actually tensions the belts with a dial nut. What a novel concept, haha.
Remove the sping. Replace the back cover of the motors with the included ones. Dissassemble the motor mounts, remount to the new ones. Put them back in, hook on the belts. Screw on the nuts and tens away :P
You will need
M3x8 8 pieces for the motor mounting.
M4 x 50 bolts 4 pieces
M4 locking nut 4 pieces
I would not recommend to use original bolts and heat insert nuts, they strip and damage the housing.
Print in at least ABS, my petg ones (red on the pictures) warped pretty fast, but i was able to print in abs to replace them.
use many walls, at least 5. 0.15 Layer height.
Supports are integrated no need to turn them on.
