1 / 5
Dactyl Manuform 5x6
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my version of Tom Short's Dactyl Manuform 5x6 ergonomic keyboard (see: https://github.com/tshort/dactyl-…
- Rating
- 4.667 / 5
- Likes
- 54
- Downloads
- 598
- Makes
- 8
- Views
- 5,187
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is my version of Tom Short's Dactyl Manuform 5x6 ergonomic keyboard (see: https://github.com/tshort/dactyl-keyboard ).
Changes from the original:
- circular holes for USB and TRS panel-mounted sockets
- added reset button hole
- fixed thin wall around top-right thumb key
- added some space around middle-right thumb key so the keycap (DSA profile specifically) doesn't come in contact with the case (see https://github.com/tshort/dactyl-keyboard/issues/26 )
- changed the heat set insert holes to smaller holes for wood screws (I used 3x10mm)
- removed "wire posts" (those tiny things that were supposed to guide wires/diode leads)
Only parts for the right hand side are included, use the mirror function in your slicer to get the left hand side parts.
I recommend using Cura with tree supports - the supports from PrusaSlicer are practically impossible to remove.
Build log: https://blog.jfedor.org/2020/11/dactyl-manuform-build-log.html
Category: Computer