1 / 4
The Planet Unresponsive Yo-Yo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An unresponsive 3D printed yo-yo with an undercut design.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
The Planet is an unresponsive undercut yo-yo. It's inspired by the Alchemik Talent and uses the same specs and takes strong inspiration for the unique undercut profile. It's other source of inspiration is the Fluid Print Dynamics Kayto, from which it derives it's mostly hollow hub and double rim design.
I recommend printing the whole thing solid, with a goal weight for the printed pieces of around 58g (which will bump up to around 63g total with hardware).
Key Specs:
- Diameter: 56 mm
- Width: 44 mm
- Bearing: C-size
- Gap Width: 4.6 mm
- Response: 19mm Pads
Required Hardware:
- C-size bearing
- M4 20mm hex bolt
- M4 nut
- 2x 19mm response pads or silicone