Adaptor for Vacmaster 1-7/8 Flexible Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptor for Vacmaster 1-7/8 Flexible Hose. Made with mild tapered inlets and outlets for a snug factory-like fit.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
https://www.printables.com/model/74660-cyclone-vacuum-dust-separator-version-41
Quick adaptor for Vacmaster 1-7/8 Flexible Hose vacuums to fit onto the cyclone separator version 4.1. These can be oriented any way you like and do not require glue to install, although they can easily be permanently fixed in place with epoxy. These are built with factory Vacmaster hoses in mind meaning there is a slight taper to the seating surfaces which will allow for a friction fit with the hoses for easy removal and inspections. Minor sanding will be needed to smooth contact surfaces depending on your parts orientation and printing skills.
Built with hose weight in mind, these adaptors should allow your hoses to enter and exit the separator at a downward angle and take stress off the critical areas..
Mine were printed at 100% infill, or 5 wall thickness and tree supports.
Please use freely, and enjoy this fantastic shop tool