Drillbit Sharpening Jig for Dremel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.79 – €0.97 net (excluding VAT)
For file: DrillBitSharpeningjig2-7mm-118_0.2mm_PETG_MK3S_1h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.01 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sharpening Drillbits with a Dremel and a Cutting disk
- Rating
- 4.677 / 5
- Likes
- 2,038
- Downloads
- 5,461
- Makes
- 38
- Views
- 20,645
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits.
Credits for the idea to voltNik:-)
Update 20.4.2022:
I replaced the model-files for those with threads as seen on the picture.
Thanks for the hint in the comments - sorry for that!
Also added some support.
Update 21.4.2022:
Added “flat” models(gcode) for easy printing.
Update 26.12.2022:
Exchanged to corrected stl and gcode-files with shorter printtime!
Added Models for 118° standard angle.