K1 Series Hotend - Mount for Dragonburner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Creality K1 hotends on Dragonburner v8 (Orbiter extruder holes)
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 133
- Makes
- 0
- Views
- 795
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I decided to try and implement extruder from my K1C into DB8 toolhead and I was successful!
Compatibility - This adapter will work with any hotends made for K1 series including:
- K1 hotend
- K1C hotend
- Microswiss Flowtech
- Trianglelab's CHCB-OT
DISCLAMER
This mount requires you to sand down two edges from heatsink, it should not impact performance and you can still put it back on K1 series printer.
After sanding and mounting heat sink you will need to drill trough mounting holes of toolhead due to clearance issue caused by screws.
Cowl Modification
Sadly this implementation requires slight modification of the DB8 cowl, at least the removed area is small, mounting it first time might be difficult and brake one side of the cowl so using acetone or superglue to fix it might be necessary (Acetone works an ABS and ASA).
Alternative to this is to sand down heatsink with a file on the sides where is slides like in the picture bellow, this might be preferable if you want to fully disassemble toolhead in the future without breaking the cowl.
