1 / 1
Cable duct 25x15 4mm²
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
15% infill PLA or PETG
No need for support
This model was made for 4mm² cable. You can run 4mm² cable above the bumps.
For 2.5mm² cable, it fits below the bumps
M4 screw holes