Rail Spike - A 40Max-compatible blaster - some tweaks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My collected tweaked parts for the Rail Spike
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 48
- Makes
- 0
- Views
- 671
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First up, thanks to Domochevsky for releasing this blaster AND the step files!
Secondly, the parts here use M3 heat set inserts (5mm OD, 3-3.5mm height). Don't use any smaller ones, they will fall out or not be strong enough.
On to the mods…
Barrel
- Thickened the top of the barrel and added three M3 heatset inserts, so that you can add a Picatinny rail (model also included)
- Made a split pin which needs a heatset insert and a M3x20mm bolt to connect the barrel to the main grip body (replaces barrel-axis-v2.stl)
- Thickened the areas around these pivot holes
Barrel lock
- Adjusted the tolerences for the channel that the barrel lock rides on, so that it slides more freely. Also trimmed these latches so they catch better.
- Added threaded insert holes for the finger grips, you can then add a bolt or the included finger paddles to make them easier to push
Safety muzzle
- Added a loop where you can attach a sling
- Thickened the barrel to make it easier to print
Trigger
- Made the finger recess slightly curved like traditional triggers, also made it slightly narrower, as mine would bind in the grip piece
All in all, I had a lot of fun modding my blaster, hopefully these files will be useful for others.