Qidi Plus 4 Top Raiser Ventilation system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extra air cooling raiser kit
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 70
- Makes
- 2
- Views
- 1,473
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Raiser with full integrated extra cooling system.
Print with PETG-CF or higher strength and heat resistant.
0.2 layer
3-Walls
15% Gyroid
Printing the frame is a bit tricky since you need to support the interior tube so, i added a sacrificial tube for you to test how you prefer printing it with your support.
BOM:
7X M3 brass insert
7X M3 screws
1X GDSTIME 12032 120mm x 32mm 24V
1X JST 2pin female connector
2X JST 2pin male connector (or you can cut the wire and re-use the JST from the fan)
extra 18gauge 2 lead-wire (black/red)
Mod to do in the printer.cfg:
[fan_generic Raiser_Cooler]
pin:PB10
max_power: 1.0
shutdown_speed:0.0 #1.0
cycle_time: 0.0100
hardware_pwm: false
kick_start_time: 1.0
off_below: 0Use the PB10 connector on the toolhead PCB