1 / 2
Gridfinity storage for SN-58B crimper jaws
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity storage for SN-58B crimper jaws and the hex key. 4x2x2 units, stacking lip included.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 60
- Makes
- 0
- Views
- 358
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
All of the compartments are the same size, even though the jaws are all different. I was lazy, and this seems to work well enough.
The SN-06WF jaw protrudes a bit too high above the surface and causes any bins that get stacked on top of this one to sit about 0.5 mm higher than they should. I didn't bother fixing it, but I included the FreeCAD file if you want to fix it yourself.
My print settings:
- 0.20mm SPEED
- Perimeters: 1
- Top: 2 solid layers, 0.40 mm minimum shell thickness (I should have used more, the top surface is quite rough)
- Bottom: 2 solid layers, 0.40 mm minimum shell thickness
- Infill: 10 % grid
With these settings, it took 36 g of PLA to print this.