SFP Holder/Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case designed to hold 25 standard sized SFP's with a friction lock lid. Can handle any SFP except for QSFP's
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 162
- Makes
- 1
- Views
- 668
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
If you work in tech, you probably know what an SFP is. And if your job is like mine, you end up with over a hundred of these little buggers sitting in a plastic bin. And you can never find the right one when you need it, either!
My solution: a simple box and lid that'll hold any 25 SFP's you want, a nice flat top on the lid so you can put a label on it, and a friction fit so that they don't accidentally fall out when you grab the box and run back to the server room.
It's not fancy, but it gets the job done and is relatively easy to print. I used Prusa slicer default settings for PLA fast and only changed infill to 10%. On my CoreOne it took less than 7 hours to print 2 at the same time.