Fat Bike Peanuts (Presta Nuts for Single Wall Rims)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nut for Presta tubeless valves and single wall rims that keeps the nut from bottoming out on the valve base.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
When using a single wall fatbike rim and a tubeless valve with a conical gasket, the gasket will sometimes stick through the rim causing the Presta nut to bottom out against it before a good seal is formed against the rim. (Details of this issue can be found here.)
This Presta nut design serves as both a conical spacer and Presta nut in one, akin to the Problem Solvers Super P-Nuts.
A full writeup on these Peanuts can be found here.
(This is not a clone, but a work-alike, designed as a rainy day experiment in what's possible with 3D printed Presta valve threads.)