Rambo + Atx + Raspberry Pi + Viki2 case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case that lets you mount the new Viki panel on the front along with mounts inside for a Rambo 1.3 board and…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a case that lets you mount the new Viki panel on the front along with mounts inside for a Rambo 1.3 board and a raspberry pi with enough room left over for the wires. Ventilation is provided by the ATX fan. Includes spaces for 6x3mm disc magnets to attach the power supply and still make it easy to open it up and poke around.
Magnets: https://www.amazon.ca/gp/product/B01NCKNB9M
If you are printing this in ABS make sure you have a heated enclosure.. it will warp itself apart otherwise.
I reccomend printing with 3 outside layers for strength and this does require supports.
Assembly : there are matching holes to bolt the front piece to the back piece. There are also holes to bolt the Viki panel to the case but I found mine friction fit tight enough I didn't need them.
Print Settings
Rafts:
No
Supports:
Yes
Category: 3D Printer Parts