Bear KVM (10 inch 2U Rackmount KVM)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A KVM for 4 computers with an integrated 5 inch monitor to be mounted in a 10 inch/half rack server rack.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 12
- Makes
- 0
- Views
- 554
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is the Bear KVM, a 4PC rackmount KVM for your mini network rack! It uses a cheap KVM off of Amazon, and a 5 inch HDMI screen to allow you to connect up to 4 computers to 1 monitor/usb output on the top of your rack, and it only takes up 2 half-rack units of space.
Print Settings
Printed in PETG with 100% infil on the bracket and 15% infill on the shelf which isn't as structural. The Bracket can be split in half to fit on Prusa beds.
Bill of Materials
- ELECROW 5 Inch Mini Touchscreen Monitor - $38
- DGODRT 4K HDMI KVM Switch - $34
- StarTech 1 FT Panel Mount USB Cable (2 Pack) - $14
- 6x M3x6 Bolts (6x)
- 4x M3x10 Bolts (4x)
- 4x M3 Nuts (4x)
- 6x M3 Heatset Inserts (6x)
- PETG Filament
- Velcro (Optional)
Assembly
Print the faceplate and the shelf. Install the 5in screen using M3x10 Bolts and M3 Nuts. Slide the Mini-USB remote into the slot for it upside down. Install the 2 panel-mount USB ports with the included screws. Add the M3 Heatset inserts into the 6 holes at the front of the shelf, then use M3x6 Bolts to attach the shelf to the panel. attach the remote cable, HDMI, and USB-C to the monitor. Then, attach the monitor's USB, HDMI, and USB Panel Mounts to the KVM's inputs and attach the KVM to the shelf with some Velcro or double-sided tape. Install into your rack, and then you should be able to attach the included HDMI/USB cables from the KVM to any machines you would like to use.